Testing

Siren / PA cable kit originally available from BMW for use in bypassing the PA cable inside the wiring harness of MY 2015+ R 1200 RT-P models. Used only for exceptional cases where PA background noise levels are too high from LIN interference in the wiring harness. Later 1200 / 1250 models utilized twisted-pair PA wires in the harness to further reduce background noise making this harness unnecessary. Formerly BMW PN 71 60 2 447 074 or 71 60 2 452 878

Many agencies wish to add more rear lighting when laptops are used and the radio box lid (with half of your lighting) is opened facing the sky. Adding additional emergency lighting to 2015 and newer R 1200/1250 RT-P models has been a challenge as the flasher board system capacity is limited to the full complement of lighting available from BMW and does not respond well to additional loads. The Emergency Light Multiplier (ELM) enables you to add up to 12 additional LED emergency lights! The harness for lights #1 & #2 are included in the ELM wiring harness. After selecting the ELM module, move to lighting to select the lights you wish the ELM to control such as the NEW Feniex Fusion LED lights.

An LED map light is a useful addition to your motor, particularly in combination with the notepad holder. Formerly BMW PN 71 60 2 452 859

Locking LTI UltraLyte Lidar gun holster for BMW R 1200/1250 RT-P and the New F 750/850 GS-P, standard with all mounting hardware included. Powder-coated aluminum holster with steel mounting plate secures UltraLyte guns with less dust, dirt, bugs, etc. than open mounts. Aluminum constructions keeps holster from rusting if powder-coating wears off. The unique construction of the UltraLyte gun requires adding a pad strip on each side of the gun body and one over sight housing (padding provided) to ensure the gun does not rattle. Fixed pad is in position in bottom of holster for front of gun. This method should reduce the likelihood that padding comes loose over time and allows for easier cleaning of the holster. Key plunger lock secures gun from the thief of opportunity. Unit is complete with M5 stainless steel Torx mounting screws for protection bar threaded inserts and self-adhesive pad strips for gun. Select the mount and orientation for your model in the drop-down list Mounting Bracket Type. All locks are keyed the same for easy use within the agency. No adapter plate required for installation - everything is included! Free shipping is limited to the continental United States. Shipping charges apply to international shipments.